Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Henderson Homeowners Choose CGI Construction
We provide independent CGI construction service in Henderson, NV, for homeowners whose CGI windows and doors are drafty, fogged, sticking, or simply due for replacement. Our work is different because we start with the specific failure the unit is showing – flattened pile seals, a broken sash balance, worn door rollers – and fix that cause instead of selling a full replacement first. One contractor handles the CGI window or door scope and the adjacent tub-to-shower or walk-in shower work under one contract, so nothing gets left half-finished.
Our technicians have up to 14 years of experience, and they bring that to CGI units all over Henderson, from the 1990s tract homes in Green Valley to the newer hillside builds above Anthem and MacDonald Highlands. To be clear up front: Construction Henderson is not affiliated with, authorized by, or a dealer for CGI. We’re an independent construction service provider that repairs and installs these products. Call (833) 733-3914. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We’re an independent CGI repair and installation provider, not a manufacturer-authorized dealer.
- CGI windows and doors fail in predictable ways under southern Nevada heat, dust, and monsoon rain – and each has a specific fix.
- Most CGI hardware and seal issues can be repaired; frame distortion and glass seal failure usually point to replacement.
- We pair CGI window and door work with shower and bathroom upgrades under one contract for Henderson homeowners.
Why Trust Construction Henderson for Your CGI Construction?
CGI is a window and door brand, and its products fail in specific, predictable ways. We’ve spent time with CGI Traditions vinyl single-hungs, the Reliabilt vinyl slider series sold through home centers, the aluminum sliding patio doors, and the double-hung units with tilt-in sash. That hands-on history is the reason we can look at a stuck sash or a whistling slider and name the likely cause before we touch it.
When we service a CGI unit, we use quality parts that fit it – sash balances, rollers, weatherstrip, tilt pins, and glass units – and we’re honest about which parts belong on the repair. We also work warranty-safe. That means we don’t punch holes in a frame or force hardware that wasn’t built to come apart, and we keep the repair within the scope that protects the unit rather than voiding it. If a fix requires a part we can’t source reliably, we tell you and lay out the options instead of improvising something that fails in a Henderson summer. We repair, install, and service CGI equipment; we’re not factory-trained or certified by CGI.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Henderson
These are the failures we see most often on CGI windows and doors, and why they happen in this climate.
- Failed or torn weatherstripping and pile seals on sliding windows. The pile seal flattens and the weatherstripping tears, so the slider whistles in wind and water sneaks in during monsoon-driven rain. It’s the number one cause of the draft complaint we hear.
- Broken sash balances and tilt-pin mechanisms on double-hung windows. Balances lose tension and tilt pins wear or snap, leaving a sash that won’t stay up or won’t tilt out for cleaning. Forcing it jams the mechanism further.
- Vinyl frame distortion and glass seal failure (fogging). Southern Nevada UV and repeated heat cycling stress older CGI units until the glass seal fails and the cavity fogs, and the vinyl itself can bow over time.
- Misaligned or worn rollers and tracks on aluminum sliding patio doors. Worn rollers make the door bind and get hard to open, and a sagging track lets water pool at the threshold.
- Clogged weep holes and drainage channels. Desert dust and grit pack the drainage path, so water can’t escape and finds its way inside instead. It shows up as a stain long before it shows up as a puddle.
Here’s the part most homeowners scheduling work in Henderson should understand. A CGI vinyl slider that’s drafty after a storm usually doesn’t need a new window. The pile weatherstrip has flattened and the weep holes are packed with dust. A qualified local pro typically pulls the sash, replaces the weatherstripping and rollers, clears the drainage path, and checks the frame for distortion before resealing – and that saves replacement when the vinyl is still straight. It’s when several units show fogged glass or bowed frames from years of UV exposure that new units become the more durable path, and a straight answer there beats repeated patch repairs.
CGI Parts & Our Repair-vs-Replace Approach
On CGI windows and doors, OEM parts – sash balances, rollers, weatherstrip, tilt pins, and glass units – are the reliable choice when they’re available, because aftermarket seals and rollers often fail early under desert heat. We don’t stock or carry genuine CGI parts, and we’re not a CGI dealer; we source quality parts that fit the unit and tell you what we’re installing and why.
The repair-or-replace call comes down to the frame. If the frame is sound and the hardware or glass is failing, a targeted repair usually pays for itself. If multiple units show frame distortion or glass seal failure, replacement is the more honest recommendation. We walk you through both with the unit in front of us, and the written estimate sets the final price. Call (833) 733-3914 for a free estimate.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We test the operating hardware, inspect the weatherstripping and pile seals, check the drainage path, and look for frame distortion and glass fogging on each CGI unit in question.
- 2
Repair or install. We replace the specific failed part – balance, roller, seal, tilt pin, or glass unit – or, if you’re replacing, we set and seal the new CGI unit to the opening.
- 3
Test. We operate the sash or door through its full travel, confirm it locks and seals, and run a water check on the drainage path before we call it done.
- 4
Warranty. We explain what the repair covers and how to keep it protected, and we keep the work within the scope that safeguards the unit.
Each step is done by an experienced technician, and the estimate up front is what you’ll pay unless the scope changes with your approval.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Henderson
We handle the CGI window and door types you’ll find across Henderson’s housing stock:
- CGI Traditions vinyl single-hung windows
- CGI Reliabilt vinyl sliding windows, the builder-grade series sold through home centers
- CGI aluminum sliding patio doors
- CGI vinyl double-hung windows with tilt-in sash
That covers repair and replacement for worn hardware, seals, rollers, and glass, plus installation of new units. We don’t claim to stock any of these – we assess your existing units and specify the right fix. This is where CGI work meets the rest of the house, too. Many Henderson homeowners pair a window upgrade with a bathroom change, and a tub-to-shower conversion or a walk-in shower install under the same contract avoids a second round of scheduling and mess.
We Also Service These Brands
We’re not tied to a single manufacturer. Beyond CGI, we install, repair, and specify products from KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler fixtures, along with the roofing and exterior brands we work with. That breadth means an independent take on your CGI repair – and a contractor who can handle the kitchen or bath around it without sending you to three other companies.
FAQs – CGI Construction Service in Henderson
No. We’re an independent construction service provider. We are not affiliated with, authorized by, or a dealer for CGI, and we’re not factory-trained or certified by the brand. We repair, install, and service CGI windows and doors with quality parts that fit them.
Yes. We use quality parts that fit CGI units – sash balances, rollers, weatherstrip, tilt pins, and glass units – and we favor OEM parts when they’re available, since aftermarket seals and rollers tend to fail early under desert heat. We don’t stock or carry genuine CGI parts, but we source what fits the repair properly.
Most single-unit repairs are done in a visit. Replacing a window, patio door, or a full set of CGI units takes longer because each unit is set, sealed, and tested to the opening. We confirm the timeline in your estimate before any work begins.
We cover CGI vinyl single-hung and double-hung windows, the Reliabilt vinyl sliding series, and CGI aluminum sliding patio doors, including hardware, seal, roller, glass, and frame issues. If you’re not sure which CGI type you have, describe it when you call and we’ll help you sort it out.
Not when it’s done correctly. We work within the scope that protects the unit – no forcing hardware, no cutting into frames – and we’re clear about what the repair covers. If a part is borderline, we explain the risk before we proceed rather than after.
Typical estimated ranges for the CGI-related and bathroom work we handle in Henderson are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,185 – $13,950 |
| Shower Replacement | $2,790 – $7,905 |
| Tub-to-Shower Conversion | $3,255 – $9,300 |
| Walk-In Shower Installation | $4,185 – $11,160 |
Call (833) 733-3914 for an exact quote – estimates are free.
Book Your CGI Service in Henderson, NV
Whether it’s a whistling slider, a fogged double-hung, or a patio door dragging on its track, we’ll diagnose the CGI unit and give you a straight answer on repair versus replacement. We also pair that work with bathroom upgrades under one contract if you’re planning both. Call (833) 733-3914 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Henderson.