Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Henderson Homeowners
Henderson yards take a beating that fences in wetter climates never see: months of sun, hard caliche soil that fights every post hole, and wind that finds the weak panel before anything else. A fence line that leans, sags, or rattles is usually the first thing a neighbor notices and the last thing a homeowner wants to spend a weekend fixing. Our technicians have up to 14 years of experience setting posts and hanging gates in exactly this ground, and we connect you with independent local professionals who do the work. Same-day service is available on many repairs. Call (833) 733-3914 to talk through your fence line and get a free estimate.

What Our Fence Installation Service Includes
Wood Fence
Wood remains the most requested fence material in Henderson because it absorbs the desert sun well and can be matched to just about any home’s exterior. You’ll want wood when you’re replacing a rotted cedar or pine run, matching an existing fence section, or starting a privacy line from scratch. We specify the material for the application – cedar, pressure-treated pine, or composite – and install it with posts set at the right depth for our soil and the right spacing for our wind loads.
Chain Link Fence
Chain link is the practical answer when you need a durable boundary around a side yard, a dog run, or a pool enclosure that doesn’t need to look like anything more than it is. It goes up fast, holds up to heat, and comes in coated and galvanized finishes that look quite different up close. We specify galvanized steel or vinyl-coated chain link based on where the fence sits and how much UV exposure it gets, then set the posts true.
Vinyl Fence
Vinyl fencing has become a real contender in Henderson because it doesn’t need repainting and it handles sun without fading the way some homeowners expect. It’s the right call if you want the look of painted wood with a much lighter maintenance calendar. A typical vinyl fence installation in Henderson runs about $3,255 to $8,370 depending on run length and post spacing. We specify vinyl that’s rated for UV exposure and install it with proper post footings so the panels stay rigid through wind season.
Aluminum Fence
Aluminum fencing gives you an open view of the yard while still marking a clear boundary, which is why it’s popular around pools and along property corners. You’ll want aluminum if you want something that doesn’t rust and doesn’t block sight lines. Aluminum fence installation in Henderson typically runs about $3,720 to $9,300, shaped by the style selected and total linear footage. We work with Ameristar and similar systems so pickets, posts, and gates all match the same spec.
Iron Fence
Wrought iron fencing delivers weight and permanence that aluminum can’t match, and it’s the material homeowners choose when they want the fence line to look like it belongs to the house. That’s especially true on older Henderson properties with established landscaping. Iron requires careful anchoring because the panels are heavy, and we set posts in concrete with the correct spacing so gates swing true and panels stay aligned.
Fence Repair
Not every fence needs replacing. Often a leaning post, a broken picket, or a gate that drags needs repair rather than a new run, and that’s worth knowing before you commit to a full install. We assess the failure point – footing, hinge, rail, or post rot – and recommend the smallest fix that actually lasts. When a repair isn’t the smart money, we’ll tell you that too.
Privacy Fence
Privacy fences in Henderson usually go up along side yards, back property lines, and anywhere a neighbor’s second story looks down into your yard. A solid wood or vinyl privacy fence blocks sight lines and softens street noise. We set privacy panels tight, account for wind load on taller runs, and specify material that will still be standing in ten years.
Fence Gates
Gates are the part of a fence that actually gets used, and they’re usually where a fence fails first. A gate that sags, drags, or won’t latch is a daily annoyance and eventually a lock problem. We hang gates with properly sized posts and hardware, then check the swing and latch before we call the job done.
Commercial Fencing
Commercial fencing at a small business, rental property, or shared lot has to satisfy different requirements than a backyard fence – height, access, security, and often code. We spec commercial runs in chain link, ornamental aluminum, and steel, matching the fence to what the property actually needs rather than what’s cheapest.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Fence materials perform or fail based on the small details – coating thickness, post wall gauge, picket spacing, hinge quality – and brand knowledge is how we specify them correctly. We work with Barrette for vinyl and composite systems, where the profile and cap detail are the difference between a fence that looks crisp in year one and one that still does in year ten. We also specify Ameristar ornamental aluminum because the post and rail connectors hold up better than generics under the wind loads we get in Henderson.
Master Halco products show up frequently on chain link and ornamental jobs, and we know the coating grades that actually survive our UV exposure; Jerith is a common choice for wrought iron work on Henderson homes where the fence has to match an established look. Whether you’re replacing a single run or fencing a whole property line, we can match panel style, color, and post spec so the new fence sits next to the old one without looking like an add-on. Whether you have Barrette, Ameristar, Master Halco, Jerith, or any other make, we can help.

Signs You Need Fence Installation Right Now
- Posts leaning or pulling away from the ground. In Henderson’s caliche-heavy soil, footing failure is the most common reason a fence line starts to go. Once one post leans, the panels it carries are load-bearing in a way they weren’t designed to be, and the next wind event finishes the job.
- Rotted or splintered wood along the bottom rail. Wood fence rot starts at the soil line where irrigation and moisture collect. If you can push a screwdriver into the bottom rail, the panel is closer to failing than it looks.
- Gaps between panels or a sagging top rail. A top rail that dips usually means a post has settled or a rail has bowed out. That’s a repair – and once ignored, it becomes a full panel replacement.
- A gate that drags, sticks, or won’t latch cleanly. Gate problems are almost always a post or hinge issue, and a gate that won’t close is a security problem, not just an annoyance. This one rarely improves on its own.
- Sun-bleached, faded, or cracking vinyl. Vinyl that’s gone chalky or shows hairline cracks is past its useful life and will keep cracking through the summer. That’s the point where replacement is usually cheaper than patching.
Our Fence Installation Process – Step by Step
- 1
On-site assessment and measurement. We walk the property line, note utility locates, check existing footings, and measure total linear footage so the estimate reflects the real job. No guessing at run length from a photo.
- 2
Material specification and written estimate. We match the material to the application – wood for privacy, aluminum for view, vinyl for low maintenance – and put every line item in writing. The written estimate sets the final price, with no change orders once work starts.
- 3
Permits and utility checks. Fence height and setback rules vary by jurisdiction, and most cities require a permit for taller or front-yard fences. We pull what’s required and confirm no underground utilities are in the post line before the first hole is dug.
- 4
Post setting with proper footings. This is the step that determines whether your fence is still standing in ten years. Posts are set plumb, at the specified depth, in concrete with correct crown height above grade so they don’t wick moisture.
- 5
Panel, gate, and finish check. Panels go up, gates get hung and adjusted for swing and latch, and we walk the line with you before we pull out. Workmanship warranty covers the installation.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Henderson?
Fence installation in Henderson typically runs from about $3,255 to $8,370 for a standard vinyl run, and $3,720 to $9,300 for aluminum, depending on the material and the length of the fence line. Those ranges reflect the local market – our soil conditions, wind load requirements, and permit considerations all shape the final number.
| Fence type | Typical estimated range |
|---|---|
| Vinyl fence installation | $3,255 – $8,370 |
| Aluminum fence installation | $3,720 – $9,300 |
What moves your number up or down: total linear footage, post count and footing depth, gate count, material grade (Barrette or Ameristar systems price differently than generics), removal and disposal of an existing fence, and any height or setback rules that change the permit scope.
The way to avoid overpaying is to get a written line-item quote, not a single number with no breakdown. Any contractor who won’t put material, labor, permits, and disposal in writing is a contractor you’ll overpay somewhere. Our free estimate includes all of it, and the written estimate sets the final price – no change orders.
Fence Installation Near Henderson – Our Service Area
We serve Henderson and the surrounding communities, including Whitney, Paradise, Winchester, Enterprise, and Boulder City. Response timing depends on your location and the day, and we’ll give you a clear window when you book. For a neighbor city, see fence installation in Paradise; for the Whitney area, see fence installation nearby. You can also explore our full range of work across Construction Henderson.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Henderson
Fence installation is the process of setting posts, building panels, and hanging gates to create a boundary along your property line or around a specific area – pool, dog run, side yard, or full property perimeter. It involves footing work, material selection, and often a permit depending on height and location. We handle the full scope, from measurement through final gate check, so you don’t coordinate between a post setter and a panel installer.
Most residential fence installations in Henderson take one to three days, depending on linear footage and whether existing fencing needs removal. Longer runs or jobs that include a permit and inspection can add time to the front end. We’ll give you a clear start and finish window in the written estimate, and we don’t call a job done until the gates swing true and latch cleanly.
Typical fence installation in Henderson runs from about $3,255 to $8,370 for vinyl and $3,720 to $9,300 for aluminum, depending on material, length, and gate count. Wood, chain link, iron, and commercial spec price differently and we’ll quote those exactly for your run. Call (833) 733-3914 for an exact quote – estimates are free, and the written estimate sets the final price.
Yes, we specify and install Barrette vinyl and Ameristar ornamental aluminum, along with Master Halco and Jerith systems and other major manufacturers. We know how these systems age in Henderson’s sun and how their posts hold up in our soil. If your existing fence is one brand and you’re adding a matching run, we can source the panel style and color so the new section blends with the old.
Same-day service is available on many fence repairs, and we answer the phone 24/7. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. For planned installations we schedule to a clear window and confirm before the crew heads out.
Our installation work carries a workmanship warranty that covers the setting, hanging, and alignment work we perform. Material warranties come from the manufacturer – Barrette, Ameristar, and other brands each carry their own coverage terms, which we’ll walk you through at estimate. We don’t warranty against damage from vehicles, storms, or pets digging at the footing line.
Clear the fence line of plants, patio furniture, and anything you don’t want a crew walking past. Mark any irrigation lines or invisible pet fence runs you know about, and make sure we can reach the property line without moving a vehicle. Locate your property corners beforehand if you have the survey – it saves time and prevents a boundary surprise mid-install. If you’re also planning exterior work, our driveway and pavers and windows and doors teams can be scheduled in the same visit so the whole exterior lines up.
Schedule Your Fence Installation Service in Henderson Today
Whether you’re replacing a leaning wood fence, adding a privacy run, or fencing a whole property line in vinyl or aluminum, we’ll walk the job with you, spec the right material for our soil and sun, and put the whole scope in a written estimate. The estimate is free and there’s no obligation. Call (833) 733-3914. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Henderson.